Bitumen emulsion is one of the most widely used binders outside hot asphalt mixes, yet one of the least understood by buyers. Its principle, dispersing bitumen in water, makes it possible to work cold, without heating, for uses that conventional asphalt does not cover. Used well, it simplifies entire worksites; poorly chosen, it gives disappointing results. E-Station puts emulsion back in the context of its real uses.
Here is how an emulsion works and what it is used for.
The principle of emulsion
An emulsion disperses fine droplets of bitumen in a water phase, stabilised by an emulsifier. The mixture stays fluid and can be applied at ambient temperature. On contact with the surface, the emulsion “breaks”: the water separates and evaporates, and the bitumen settles and recovers its binding properties. This break, which is more or less rapid, is a key characteristic of the product.
Need cold asphalt? We deliver Époxy végétal in one-tonne big bags anywhere in mainland France, with traffic possible 10 minutes after laying. Choose your department and the delivered price is displayed.
Order cold asphaltRapid, medium and slow-setting emulsions
Emulsions are classified by their breaking speed. A rapid break suits tack coats and surface dressings, where quick setting is wanted; a slow break suits techniques where the binder must stay workable for longer, such as emulsion-bound granular materials. Choosing the right breaking speed is as important as choosing the right grade for an binder laid hot.
Common uses
Emulsion is used above all for the tack coat — the thin film that bonds two layers of asphalt mix — as well as for surface dressings and some cold techniques. It is valuable where mobilising a hot-mix chain would be disproportionate, or for maintenance work.
- Tack coat: bonding between layers, rapid break.
- Surface dressing: wearing surface, surface maintenance.
- Cold techniques: emulsion-bound granular materials, slower break.
Benefits and limits
Emulsion avoids heating, reduces logistical constraints and suits small worksites as well as maintenance. In return, its structural uses remain limited: on a heavy-traffic wearing course, hot asphalt remains the right choice. Its cost and application are assessed according to the intended use, rather than as a universal alternative to straight bitumen.
Storage and conditions of use
An emulsion is sensitive to storage conditions: temperature, duration, agitation. Unsuitable storage can cause premature breaking or settling that makes it unusable. The weather at the time of application also matters: rain and cold disrupt the break. These constraints need to be anticipated, as with any choice of binder according to context.
Frequently asked questions
Does emulsion replace hot bitumen?
No: it serves cold uses (tack coats, surface dressings, maintenance). A structural asphalt mix under heavy traffic remains the domain of hot bitumen.
What does the “break” of an emulsion mean?
It is the separation of water and bitumen on contact with the surface. Its speed (rapid, medium, slow) determines the appropriate use.
Can an emulsion be stored for a long time?
Its stability is limited: storage temperature and duration can cause settling or premature breaking. It should be used within controlled time limits.
Need a quotation? E-Station draws up a priced offer, grade by grade, with a certificate of analysis and specified delivery terms. Request a quotation.

No comments yet!