35/50, 50/70, 70/100: these three grades cover most road pavements, and each has its own field of use. Each pair of figures gives the binder's penetration range at 25 °C, and therefore its consistency. Understanding what each grade covers means ordering by need rather than by habit. E-Station quotes these three grades for export and within Europe, backed by a certificate of analysis.
Here is what concretely distinguishes these grades, and how to choose them according to actual use.
35/50 bitumen: the hard grade for hot climates
35/50 is the hardest of the three. Its low penetration makes it resistant to deformation under heat and load: it withstands rutting on heavily trafficked routes and in hot climates. On the other hand, its stiffness makes it more prone to thermal cracking where winters are harsh. It is a preferred grade for the coastal Maghreb and West Africa. A road bitumen of this class is ordered first and foremost for its high-temperature resistance.
Need cold asphalt? We deliver Époxy végétal in one-tonne big bags anywhere in mainland France, with traffic possible 10 minutes after laying. Choose your department and the delivered price is displayed.
Order cold asphalt50/70 bitumen: the benchmark compromise
50/70 sits in the middle and is the most widely used grade in Western Europe. It balances high-temperature resistance and low-temperature flexibility, which makes it versatile on a wide range of projects in temperate climates. When no extreme constraint applies, it is often the safest default choice. Its wide use also makes it a grade whose quotation is well documented.
70/100 bitumen: flexibility for cold climates
70/100 is the softest of the three. Its flexibility limits thermal cracking when temperatures stay low for long periods, which makes it suited to cold climates, high-altitude areas and regions with wide seasonal swings. Under high heat or heavy traffic, however, it deforms more easily: its use assumes service conditions that do not push it beyond its range.
Choosing between the three: combining climate and traffic
The right grade depends on the site. The rule fits in one sentence: start from the climate to set the flexibility, then adjust for traffic. A hot climate points to 35/50; a cold climate to 70/100; heavy traffic moves the cursor towards greater hardness. Our comparative guide to grades sets these criteria side by side for a quick decision.
The selected grade then goes into the design of the asphalt mix, which is why it is fixed before the formula is finalised.
Standard and compliance: what each grade guarantees
These three classes fall under standard EN 12591, which sets limits on the penetration and softening point of each. Ordering a standard grade gives you an enforceable reference: the binder received must meet the stated ranges. E-Station attaches a certificate of analysis to each lot, so that the class ordered matches the binder delivered, which can be checked on arrival.
Typical uses of each grade in the field
Beyond the theory, each grade has its preferred applications. 35/50 is found in the wearing courses of major routes in hot climates, where rutting is the number one risk. 50/70 covers most urban and inter-urban roads in Europe, from county roads to base courses. 70/100 serves cold regions and pavements where flexibility matters more than high-temperature resistance.
- 35/50: high heat, heavy traffic, heavily loaded wearing courses.
- 50/70: versatile use in temperate climates, balanced default choice.
- 70/100: cold, altitude, wide seasonal swings.
Ordering the right grade for export
For export, the choice of grade comes with a logistics constraint: packaging, destination port and documentation. A grade perfectly suited to the local climate loses its value if it arrives off-specification or without traceability. E-Station secures both sides at once: the grade is matched to the climate and traffic of the project, and each lot travels with its certificate of analysis. This dual requirement avoids unpleasant surprises between order and laying.
Frequently asked questions
What is the difference between 50/70 and 70/100?
70/100 is softer: it resists cold better but deforms faster in heat. 50/70 is more balanced and suits most temperate climates.
Is 35/50 suitable for cold climates?
Hardly: its stiffness makes it prone to thermal cracking in harsh winters. It is made for heat and heavy traffic.
Can one grade be replaced by another in case of shortage?
Only after analysis: a neighbouring grade may suit the site, but the choice must be validated against climate and traffic rather than on availability alone.
Need a quotation? E-Station draws up a priced offer, grade by grade, with a certificate of analysis and specified delivery terms. Request a quotation.

No comments yet!