Skip to main content

Sulfur for barley: rate, stage and decision grid

Soufre élémentaire jaune destiné aux fabricants d'engrais et d'acide sulfurique, E-Station
Apport soufre orge : granulés de soufre jaune, matière première des engrais soufrés sur céréales, par E-Station

Agronomy · Sulfur

Sulfur for barley: rate, stage and decision grid

From 20 to 60 units of SO3 depending on soil and winter rainfall, from tillering to the 1 cm ear stage, with up to 20 q/ha at stake. Arvalis benchmarks, with sources.

Request a quotation →

Barley often comes after wheat and far behind rapeseed in sulfur fertilisation decisions, even though it occupies the same soils and goes through the same wet winters. Yet a decision grid for sulfur on barley exists, based on three criteria, and it should be read before the first nitrogen application.

Sulfur has stopped falling from the sky. The French Academy of Agriculture points out that atmospheric deposition has fallen sevenfold in thirty years and now supplies only about 11 kg of SO3 per hectare, while straw cereals need between 50 and 100 kg. The balance comes from fertilizer, and therefore from an industrial chain that starts with the solid sulfur presented on our page on sulfur trading. Here is how to plan sulfur for barley, on winter and spring barley alike, figure by figure.

What is the sulfur requirement of barley?

Exports give the order of magnitude. The barley sheet from Fertilisation-edu puts the sulfur removed by a crop of 80 quintals of grain with 4 tonnes of straw at 28 kg of SO3 per hectare, 23 kg in the grain and 5 kg in the straw. Next to the 146 units of nitrogen and 96 units of potash exported by the same crop, the quantity looks modest. Yet it determines the fate of the others, because the plant makes neither methionine nor cysteine without sulfur, and a block in protein synthesis prevents the nitrogen from being used.

The difficulty lies in availability rather than quantity. Soil sulfur is stored overwhelmingly in organic form, and the sulfate ion, the only form the root can absorb directly, behaves like nitrate: it moves down with drainage water. A wet winter empties the reserve in the ploughed layer just before the barley needs it.

Sulfur for barley: what rate of SO3 per hectare?

Sulfur recommendations for barley follow those for wheat. Arvalis states it plainly: application recommendations for winter and spring barley are identical to those for wheat, and the decision grid leads to rates of 20 to 50 kg of SO3 per hectare depending on the level of risk. On spring cereals, the institute deducts 20 kg of SO3 compared with the equivalent winter crop, as requirements are lower. The data sheet from Fertilisation-edu for its part recommends 40 kg of SO3 per hectare in sulfate form in at-risk situations, applied with the nitrogen at tillering.

Yield potential pushes the rate up. In its Rhône-Alpes analysis for 2026, Arvalis advises 30 to 60 kg of SO3 per hectare on plots without regular organic inputs, with 60 units on irrigated gravels targeting 90 quintals and 30 to 40 units on medium loams. Shallow, free-draining soils low in organic matter are the priority target; deep clay-loam or clay soils only need sulfur after an exceptionally wet winter.

Situation Sulfur application rate (SO3/ha) Source
Winter barley, general grid by risk 20 to 50 kg Arvalis
Shallow or free-draining soil, no organic inputs, high potential up to 60 kg Arvalis Rhône-Alpes 2026
Medium loam, standard potential 30 to 40 kg Arvalis Rhône-Alpes 2026
Spring barley winter crop rate minus 20 kg Arvalis

Sulfur for spring barley: trial results

Even with the lower rate for spring crops, skipping sulfur still carries a cost. A fertilisation trial presented by the Chambers of Agriculture on spring barley sown on 1 March shows that an application of 40 units of mineral sulfur at sowing made up for an early-cycle deficiency and achieved 84.4 quintals per hectare, above the maximum yield obtained with nitrogen alone. The author sees this as an effect of sulfur on nitrogen uptake and proposes repeating the trial. On malting barley, where protein content determines payment, this interaction deserves close attention.

When should sulfur be applied to barley?

The window is wider than on rapeseed, but it closes quickly. Arvalis places the application between mid-tillering and the 1 cm ear stage, so that sulfate is available during rapid growth. The 2026 regional analysis sets out the order of preference: tillering is best, 1 cm ear is the limit, uptake remains possible up to 2 nodes, and the third nitrogen application comes too late to serve as a carrier. If symptoms are visible at the start of stem elongation, correction must take place before the 2-node stage to be effective.

Sulfur for barley: the rainfall threshold

The operational criterion is cumulative winter rainfall. Arvalis Bretagne considers that a total above 250 mm between 1 October and 1 March tips plots into the high-risk category, the tipping zone ranging from 250 to 400 mm depending on soil type.

For the 2026 season, the institute noted that the whole of Brittany had exceeded 250 mm since 1 October 2025, and its counterpart in Rhône-Alpes reported more than 400 mm in the Drôme, Bresse, Bièvre and Dombes. On farms that regularly receive manure or compost, only sandy, shallow and free-draining soils justified an application that year.

Sulfur for cereals: which form of fertilizer to choose?

For sulfur on barley, the choice of product comes down to price. Arvalis concludes that the fertilizer form, whether sulfate, thiosulfate or elemental sulfur, does not affect the effectiveness of the application, and advises choosing according to cost and compatibility with other nutrients. Ammonium sulfate often comes out on top for this reason, the institute recommending an N to SO3 ratio of 2 to 3 in the chosen fertilizer. The characteristics of this product are detailed in our article on ammonium sulfate, and the equivalent benchmarks for wheat in our article on sulfur for wheat.

Organic sulfur fertilizer: elemental sulfur is permitted

Barley grown organically has access to a limited but real range. The Annex II of the European regulation on fertilizers approved for organic farming, as summarised by the Brittany Chamber of Agriculture, authorises elemental sulfur as well as potassium sulfate that may contain magnesium salt, the latter provided it is obtained from crude potash salt by a physical extraction process.

Since 16 July 2022, both products must comply with the contaminant limits of European regulation 2019/1009. Elemental sulfur acts more slowly, since it must be oxidised into sulfate by soil micro-organisms, which places the barley sulfur application early in the cycle rather than as a correction. We develop this point in our articles on elemental sulfur in organic farming and on the potassium sulfate.

The cost of skipping sulfur and the origin of the sulfur

The agronomic penalty has been quantified. Arvalis mentions common losses of 5 to 12 quintals per hectare and losses above 20 quintals in the most exposed situations when the deficiency is not corrected. Compared with the cost of a 40-unit SO3 application on barley, the comparison needs no complicated calculation. Symptoms and diagnostic tools are described in our article on sulfur deficiency in wheat and cereals.

The price of these units, however, is completely beyond the farmer's control. The sulfur in sulfur fertilizers is a co-product of refining and gas processing, and world demand exceeded 71 million tonnes in 2024, 60% of it for fertilizers, according to World Fertilizer. The 2026 global sulfur crisis pushed the Middle East FOB price from 173 dollars per tonne at the end of January 2025 to 531.50 dollars at the end of January 2026, according to Argus Media. The bag of ammonium sulfate delivered to a cooperative in the Beauce or Hainaut bears the mark of this market.

What E-Station does

E-Station supplies solid sulfur to sulfur fertilizer manufacturers, sulfuric acid producers and distributors supplying cereal-growing areas. This raw material then becomes the sulfur fertilizer behind every late-winter application on barley. The product is delivered as granules, pastilles or crushed lumps, in bulk or big bags, with a certificate of analysis per lot and origins outside the Gulf.

Our sulfur trading hub presents the available grades, while the pages sulfur in France and sulfur delivery in France describe the sea logistics through to unloading, on FOB, CFR, CIF or DAP terms. Buyers in the Benelux and across the Atlantic will find the same conditions on sulfur in Belgium and sulfur in Canada.

Frequently asked questions

How much sulfur should be applied to barley?

The Arvalis grid leads to 20 to 50 kg of SO3 per hectare on winter barley depending on the level of risk, and the 2026 regional analyses go up to 60 units on free-draining, high-potential soils. Fertilisation-edu recommends 40 kg of SO3 in sulfate form in at-risk situations.

When should sulfur be applied to barley?

Between mid-tillering and the 1 cm ear stage, usually with the first nitrogen application. Uptake remains possible up to 2 nodes, but the third nitrogen application comes too late to carry the barley sulfur application.

What is the sulfur requirement of barley?

A crop of 80 quintals of grain with 4 tonnes of straw exports 28 kg of SO3 per hectare according to Fertilisation-edu. Atmospheric deposition now supplies only about 11 kg of SO3 per hectare according to the French Academy of Agriculture, which leaves the balance to fertilisation.

Should sulfur be applied to barley after a wet winter?

According to Arvalis, cumulative rainfall above 250 mm between 1 October and 1 March tips plots into the high-risk category, the tipping zone ranging from 250 to 400 mm depending on the soil. Shallow, free-draining soils low in organic matter are the first concerned.

Which sulfur fertilizer can be used in organic farming?

Annex II of the European regulation authorises elemental sulfur and potassium sulfate obtained by physical extraction from crude potash salt. Since elemental sulfur must be oxidised into sulfate by soil micro-organisms, it is applied early in the cycle rather than to correct a deficiency.

You formulate sulfur fertilizers for barley and wheat growing areas, or you supply a sulfuric acid plant, and your buyers ask for traceable origins outside the Gulf. Request a quotation from E-Station stating the particle size and target port, and you will receive a costed proposal with the matching certificate of analysis, for the material that will go into the fertilizers for next spring's barley sulfur applications.