Skip to main content

Binder-aggregate adhesion: avoiding stripping of asphalt mixes

Adhésivité entre liant et granulat renforcée par des dopes
ENERGY TRADING · BINDERS

Binder-aggregate adhesion and adhesion agents

Why the bond between binder and aggregate determines durability, and how to strengthen it.

Request a quotation →

An asphalt mix is only as good as the bond between the binder and the aggregates it coats. When adhesion is lacking, water seeps into the interface, lifts the binder away and causes stripping: aggregates work loose and the pavement deteriorates prematurely. Adhesion is therefore a discreet but decisive parameter. E-Station takes it into account when considering the binder and the mix design.

Here is why adhesion matters and how to secure it.

Stripping

Stripping occurs when water manages to work its way between the binder and the aggregate, breaking their bond. The consequences become visible over time: aggregate loss, potholes, raveling. The phenomenon is made worse by moisture, freeze-thaw cycles and certain aggregates that are less compatible with bitumen. It is not always visible at laying, but it is paid for in service life.

Need cold asphalt? We deliver Époxy végétal in one-tonne big bags anywhere in mainland France, with traffic possible 10 minutes after laying. Choose your department and the delivered price is displayed.

Order cold asphalt

The role of aggregate type

Not all aggregates adhere equally well to bitumen. Some, known as acidic aggregates, hold the binder less well in the presence of water; others have a better natural affinity. The compatibility between the local aggregate and the binder therefore needs to be examined, especially when aggregates come from variable deposits. It is as much a mix-design parameter as the grade of the binder.

Adhesion agents

To strengthen the bond, adhesion agents (anti-stripping additives) are used: they improve the grip between binder and aggregate and limit the action of water. They are justified when natural compatibility is insufficient or when the site is highly exposed to moisture. Like any additive, they meet a specific need and should not be used across the board without reason.

Checking adhesion before work begins

Adhesion is checked through tests that simulate the action of water on the binder-aggregate pair. Carried out upstream, they make it possible to adjust the mix or add an adhesion agent before full-scale production. Anticipating this point avoids discovering stripping once the road is in service, when repairs are costly. This check follows the same logic as the choice of a grade suited to the context.

The link with overall durability

Good adhesion extends the service life of theasphalt mix just as a well-chosen binder and careful laying do. It is one link in the quality chain: a compliant binder, a suitable mix design, controlled adhesion and successful compaction. Neglecting any one of these links weakens the whole. The cost of an adhesion agent or a test remains modest compared with a pavement that has to be rebuilt.

Frequently asked questions

What is stripping?

It is the loss of bond between binder and aggregate under the action of water, which causes aggregates to come loose and the pavement to deteriorate.

What is an adhesion agent used for?

To strengthen binder-aggregate adhesion and limit the action of water, when natural compatibility is insufficient or the site is very wet.

Are all aggregates suitable for bitumen?

No: some adhere less well in the presence of water. Binder-aggregate compatibility should be examined, especially with variable deposits.

Need a quotation? E-Station draws up a priced offer, grade by grade, with a certificate of analysis and specified delivery terms. Request a quotation.

No comments yet!

Votre adresse email ne sera pas publiée.