
Rapeseed and wheat dominate advice on sulfur fertilisation, and sunflower and potato slip through the net. Yet both crops take up sulfur in quantity, on soils that are often light, and the sulfur requirement of sunflower, like that of potato, ends up costing yield in the field when nobody has calculated it.
The COMIFER places sunflower and potato in the same medium-requirement group, between 50 and 100 kg of SO3 per hectare, behind rapeseed, which rises to 100 or 200 kg. Thirty years ago, the atmosphere covered this need.
TheFrench Academy of Agriculture points out that deposition has fallen sevenfold and now supplies only about 11 kg of SO3 per hectare. The balance comes from fertilizer, and therefore from the solid sulfur presented on our page on sulfur trading. The sulfur requirement of sunflower can therefore be read in the gap between what the plant takes up and what the sky still supplies. Our conviction: on these two crops, sulfur should be decided on the basis of soil and winter rainfall, never on habit.
Sulfur requirement of sunflower: what the crop actually takes up
Sunflower builds considerable biomass in a short time and fills seeds rich in oil and storage proteins. The references from LAT Nitrogen put the requirement at 45 kg of nitrogen per tonne of seed, of which 24 kg is exported by the harvest, with 16 kg of P2O5 and 16 kg of K2O per tonne. A 3 tonne per hectare crop absorbs up to 135 kg of nitrogen, and the sulfur requirement of sunflower closely follows that of nitrogen in protein synthesis.
Sulfur requirement of sunflower: how many units to apply?
The range given by LAT Nitrogen is 30 to 40 kg of elemental sulfur per hectare, or 75 to 100 kg of SO3, preferably supplied by an NPK formula containing potassium sulfate. This recommendation places the sulfur requirement of sunflower in the upper part of the class set by COMIFER and targets at-risk situations. On a deep loam that has received livestock manure, the rate falls towards the bottom of the range. The reasoning follows that applied to rapeseed, described in our article on sulfur for oilseed rape, with markedly lower requirements.
When should the sulfur requirement of sunflower be covered?
Sunflower absorbs nitrogen and sulfur mainly from the star bud stage to early flowering. Terres Inovia uses a requirement of 4.5 kg of nitrogen absorbed per quintal of seed and considers that nitrogen stops being limiting from 150 units absorbed, which explains why applications during growth prove as effective as those made at sowing.
The sulfur requirement of sunflower follows the same logic: an application at the end of winter or early in growth arrives in time, while a late application arrives after the peak. The institute adds a warning about boron that also applies here: any application made after symptoms appear is useless.
Sulfur requirement of potato: 33 units exported by the harvest
Potato is seen as a potash and nitrogen crop, and its sulfur balance receives little comment. The export table published by Fertilisation-edu nevertheless gives clear figures for a ware potato: 22 kg of SO3 per hectare in the tubers, 11 kg in the haulm, or 33 kg for the whole plant, compared with 218 kg of nitrogen and 293 kg of K2O in the same table. The total remains below the sulfur requirement of sunflower, but it applies to much more free-draining soils.
The same sheet states that the sulfur requirement is assessed locally, after the nitrogen calculation, and that split potash applications should favour the sulfate form to avoid the effect of chlorides.
The soil context makes the question more pressing, because potatoes grow on irrigated sandy or sandy-loam soils, precisely the land where sulfate is leached every winter. Arvalis observes almost no leaching below 300 mm of cumulative rainfall from October to March, but complete loss of the available stock, around 60 kg of SO3 per hectare, above 550 mm. A sandy plot after an Atlantic winter therefore starts the season with no usable reserve.
Recognising sulfur deficiency in potatoes
Yara describes young leaves that are pale green to yellow, slowed growth and smaller leaflets, with purple colouring on the stems, petioles and leaf edges, the veins remaining lighter than the leaf blade. In severe cases, the young leaves turn bright yellow. The same source lists acid soils, light soils prone to leaching, low organic matter and poorly aerated soils as aggravating factors.
Sulfur deficiency in plants: confusion with nitrogen
What the two crops have in common is the symptom itself. The COMIFER describes general yellowing of the leaf and points out that the deficiency is easily confused with nitrogen deficiency. The difference lies in the location: since sulfur moves little within the plant, yellowing first affects the young upper leaves, whereas nitrogen hunger discolours the old lower leaves. Confusing the two leads to overdosing nitrogen on a crop unable to use it.
Visual diagnosis often comes too late for a soil correction, which leaves foliar application as the only catch-up option. We detail this technique and its limits in our article on foliar sulfur application, and the detailed symptoms on brassicas in our article on sulfur deficiency in rapeseed.
Sulfur application: rate, form and timing on these two crops
The choice of form depends on the time available. The COMIFER distinguishes sulfate, which is directly available, thiosulfate, which is quickly converted into sulfate, and micronised elemental sulfur, whose oxidation by soil micro-organisms takes longer. On a spring crop, and particularly to cover the sulfur requirement of sunflower, sulfate guarantees availability when it is needed, while elemental sulfur is better applied in autumn or on the previous crop.
| Crop | Requirement class | Benchmark figure | Source |
|---|---|---|---|
| Sunflower | 50 to 100 kg SO3/ha | 30 to 40 kg S/ha recommended, or 75 to 100 kg SO3 | LAT Nitrogen |
| Potato | 50 to 100 kg SO3/ha | 33 kg SO3/ha exported, of which 22 kg by the tubers | Fertilisation-edu |
| Rapeseed, for comparison | 100 to 200 kg SO3/ha | 75 kg SO3/ha at the end of winter, systematic application | COMIFER |
The most common carrier combines nitrogen and sulfur, and the available compositions are compared in our article on nitrogen-sulfur fertilizer. On sunflower, these formulas cover sulfur at the same time as nitrogen; on potato, potassium sulfate supplies SO3 with the potash while avoiding chlorides.
The origin of the sulfur in your fertilizer
Behind every unit of SO3 spread on a sunflower crop in the Charente or a potato crop in Picardy lies solid sulfur, a co-product of refining and natural gas processing. The 2026 global sulfur crisis highlighted the fragility of this chain: the Middle East FOB price rose from 173 dollars per tonne at the end of January 2025 to 531.50 dollars at the end of January 2026 according to Argus Media. A distributor selling a sulfur-enriched NPK to cover its customers' sunflower sulfur requirement buys this raw material several months in advance.
What E-Station does
E-Station supplies solid sulfur to fertilizer manufacturers, sulfuric acid producers and agricultural distributors serving sunflower and potato growing areas. The sulfur is delivered as granules, pastilles or crushed lumps, in bulk or big bags, with a certificate of analysis per lot and origins outside the Gulf. Our sulfur trading hub details the grades, while the pages sulfur in France, sulfur delivery in France and sulfur in Belgium describe the sea logistics through to unloading, on FOB, CFR, CIF or DAP terms. The sunflower sulfur requirement of an entire growing area is thus prepared a season ahead, at the level of the imported tonne.
Frequently asked questions
What is the sulfur requirement of sunflower?
COMIFER classifies sunflower at between 50 and 100 kg of SO3 per hectare. LAT Nitrogen recommends 30 to 40 kg of elemental sulfur per hectare, or 75 to 100 kg of SO3, in situations at risk of deficiency.
How much sulfur does a potato crop export?
According to Fertilisation-edu, a ware potato crop exports 22 kg of SO3 per hectare in the tubers and 11 kg in the haulm, or 33 kg for the whole plant, against 218 kg of nitrogen and 293 kg of K2O.
How can sulfur deficiency be recognised on a plant?
Yellowing appears first on the young upper leaves, because sulfur moves poorly within the plant, whereas nitrogen hunger discolours the old lower leaves. On potatoes, Yara also reports purple colouring on the stems and petioles.
When should sulfur be applied to sunflower?
The application must come before the uptake peak, which runs from the star bud stage to early flowering. Terres Inovia shows that applications during growth are as effective as those made at sowing, provided you do not wait for symptoms.
Which form of sulfur should be chosen for a spring crop?
COMIFER distinguishes sulfate, which is directly available, thiosulfate, which is quickly converted, and micronised elemental sulfur, which is slower because it depends on microbial oxidation. On sunflower and potato, the sulfate form secures availability in spring.
You manufacture sulfur-enriched NPKs or potassium sulfates for sunflower and potato growing areas, and you want to lock in your solid sulfur before the season in which your customers' sunflower sulfur requirement will be decided. Request a quotation from E-Station stating the grade you need and the destination port, and our brokers will reply with the origins actually available.