Oxidised bitumen is a product in its own right, distinct from a harder road bitumen: it is obtained by air blowing and has its own properties and uses. It is designated by two numbers, such as 85/25 or 115/15, which give its softening point and its penetration. Confusing an oxidised grade with a road grade leads to costly mistakes. E-Station keeps these families clearly apart and quotes oxidised bitumen against its own specifications.
Here is what characterises oxidised bitumen and where it is used.
How oxidised bitumen differs from road bitumen
Oxidised bitumen undergoes hot air blowing, which changes its structure. The result is a high softening point and low temperature susceptibility, whereas road bitumen is designed to stay flexible and adhesive within a pavement layer. Oxidised bitumen is stiffer, more resistant to creep and intended for applications where heat resistance and waterproofing matter more than deformability.
Reading the 85/25 and 115/15 designations
For an oxidised grade, the first number is the softening point in degrees Celsius and the second is the penetration. An 85/25 softens at around 85 °C with a penetration of 25; a 115/15 is harder still, softening at around 115 °C with a penetration of 15. This reading runs the opposite way to the intuition built on road grades, hence the importance of keeping them apart. The page dedicated to oxidised bitumens details these specifications.
- 85/25: softening point ~85 °C, penetration ~25, everyday waterproofing uses.
- 115/15: harder, ~115 °C, penetration ~15, applications under heavy thermal stress.
Typical uses of oxidised bitumen
Oxidised bitumen is used first and foremost for waterproofing and industrial applications: membranes, protective coatings, sealing and certain roofing applications. Its stiffness and heat resistance make it suitable where a road binder would creep. A conventional wearing course, on the other hand, calls for flexibility and is the wrong place for it.
Ordering an oxidised grade without getting it wrong
Because oxidised and road grades are read differently, the order must state the exact designation and the intended use. E-Station quotes oxidised bitumen with its certificate of analysis, as for other binders, so that the delivered softening point and penetration can be verified. The quotation takes the packaging into account, which often differs from that of road bitumen.
85/25 or 115/15: how to decide
The choice between an 85/25 and a 115/15 rests on the level of thermal stress the application will face. The 85/25 covers most everyday waterproofing needs: its softening point is sufficient for most exposures. The harder 115/15 is required when the application faces sustained high temperatures or heavy mechanical stress, at the cost of greater stiffness. As with road grades, the right product is the one suited to a given condition of use.
Handling and storage precautions
Oxidised bitumen is handled at a controlled temperature: excessive or prolonged heating impairs its properties. Keeping within the recommended temperature ranges determines how well the application performs in the end. Packaging matters too: drums, big bags and bulk involve different handling and heating constraints. These points are specified when placing the order to avoid any deterioration between delivery and use.
Frequently asked questions
Can oxidised bitumen replace road bitumen?
No. They are products with distinct uses: oxidised bitumen is made for waterproofing and industry, and pavement layers call for road bitumen.
What do the figures 85/25 mean?
The first is the softening point (~85 °C) and the second is the penetration (~25). This is the reverse of the logic used for road grades.
Does oxidised bitumen also come with a certificate of analysis?
Yes. Like any binder, a batch of oxidised bitumen comes with a certificate stating its measured characteristics.
Need a quotation? E-Station draws up a priced offer, grade by grade, with a certificate of analysis and specified delivery terms. Request a quotation.

No comments yet!