Skip to main content

Sulfur for oilseed rape: needs, rate and timing, unit by unit

Soufre en poudre jaune, matière première des engrais soufrés négociée par E-Station
Soufre colza : granulés de soufre jaune pour la fertilisation soufrée du colza, matière première négociée par E-Station

Agronomy · Sulfur

Sulfur for rapeseed: requirements, rate and timing, unit by unit

Rapeseed absorbs nearly 200 kg of SO3 per hectare and loses up to 20 q/ha when sulfur is lacking. Here are the rate, stage and form recommended by Terres Inovia, with sources.

Request a quotation →

You sowed your rapeseed at the end of August, the nitrogen is planned, and one question remains that many deal with last: how much sulfur, in what form and when? Sulfur for rapeseed is calculated to the unit, exactly like nitrogen, and decided with a growth stage in mind.

Rapeseed is the most sulfur-hungry major field crop in the European cereal system. According to the Journal Paysan Breton, which draws on Terres Inovia references, its total requirements are around 200 kg of SO3 per hectare, and a deficiency costs up to 10 or even 20 quintals. Since atmospheric fallout dropped, sulfur for rapeseed has come from fertilizer, and therefore from an industrial chain that starts with the solid sulfur described on our page on sulfur trading. This article gives you the agronomic benchmarks, then explains where the raw material of the fertilizer your cooperative sells you comes from.

What is the sulfur requirement of rapeseed, unit by unit?

Rapeseed is a brassica, and brassicas produce glucosinolates and proteins rich in sulfur amino acids. The French Academy of Agriculture places rapeseed in the group of crops whose requirements exceed 100 kg of SO3 per hectare, far ahead of straw cereals, which are between 50 and 100 kg.

The same source notes that atmospheric sulfur deposition has fallen sevenfold in thirty years and now supplies only about 11 kg of SO3 per hectare. The soil does not make up the difference: more than 80% of soil sulfur is stored in organic form, and the sulfate ion, the only form directly available, is very mobile and leaves with the winter rains.

The timing of uptake matters as much as the quantity. Again according to Paysan Breton, uptake becomes strong very early at the end of winter, from the start of stem elongation at stage C2. At that point, the plant builds its biomass in a few weeks and has no time to wait for an organic stock to mineralise. That is why sulfur for rapeseed is planned in units applied, with a date, rather than as a soil reserve alone.

Sulfur and nitrogen work together in rapeseed

On a sulfur-deficient crop, the nitrogen applied accumulates in non-protein form and yield plateaus. AgroLeague cites a total S to total N ratio of around 5 to 1 in brassicas, against 10 to 1 in cereals. The same article states that an application limited to 25 units per hectare results in a drop of around 10 q/ha compared with the 75-unit sulfate threshold.

How many units of sulfur on rapeseed?

For sulfur on rapeseed, Terres Inovia's recommendation has been stable for years: 75 kg of SO3 per hectare, in sulfate form, applied systematically. The Terres Inovia Hauts-de-France sheet uses this 75-unit rate, in available sulfate form, from the start of stem elongation. This rate applies to the vast majority of plots, including on deep soils.

When can the rate go down to 50 units?

Only one situation allows a downward adjustment. On plots that regularly receive organic matter, manure or slurry, Paysan Breton indicates an application of around 50 units of SO3 instead of 75. Terres Inovia sets this floor at 50 units and advises against going lower, even with regular organic inputs. The AgroLeague survey specifies that manures contain between 1 and 3 kg of sulfur per tonne and that poultry manure is the richest, which explains why only regular applications count in the calculation.

Plot situation Sulfur rate for rapeseed (SO3/ha) Benchmark
General case, no regular organic inputs 75 kg, sulfate form Terres Inovia
Regular manure or slurry applications 50 kg, a floor not to be crossed Paysan Breton / Terres Inovia
Correction of visible deficiency 60 kg as ammonium sulfate diluted in 500 l of water Fertilisation-edu (CETIOM)

When should sulfur be applied to rapeseed in the field?

The window is short and well defined. Paysan Breton places the application together with the first or second nitrogen application, between stages C2 and D1, that is, between the appearance of internodes and closed buds. North of the Loire, the source advises waiting until the end of February. Applying earlier exposes the sulfate to January leaching, while applying later misses the uptake peak of stem elongation.

The 350 mm rainfall threshold

Sulfate follows water. Terres Inovia considers that above 350 mm of cumulative rainfall from November to February, the risk of sulfur leaching is high. In Hauts-de-France, the 2024-2025 season saw several stations exceed this threshold, with shallow, free-draining soils particularly exposed. In these conditions, the autumn sulfate stock has gone into the drains, and the spring application becomes the only source available for stem elongation.

In what form should sulfur be applied to rapeseed?

Rapeseed will not wait. The sulfate form is directly available, whereas elemental sulfur and thiosulfate must first be oxidised by soil micro-organisms, as noted on the website Fertilisation-edu. Paysan Breton confirms that sulfate forms should be preferred, combined with another nutrient: ammonium sulfate, sulfur-enriched ammonium nitrate or sulfur-enriched nitrogen solution. We detail these products in our article on nitrogen-sulfur fertilizer and, for liquid forms and ammonium thiosulfate, in our article on liquid sulfur fertilizer.

Elemental sulfur fits into a different logic: applied in autumn or on a previous crop, it releases sulfate gradually and feeds the soil stock. On rapeseed, it is a useful complement to a spring sulfate application, which remains essential at stem elongation.

Recognising deficiency and correcting it

A deficiency can be spotted in spring by young leaves mottled with yellow, pale flowers and poorly filled pods. We devote a full article to it on sulfur deficiency in rapeseed. Correction is possible: Fertilisation-edu cites the CETIOM recommendation of 60 kg of SO3 per hectare as ammonium sulfate diluted in 500 litres of water. Correction saves part of the yield, never all of it, which argues for preventive application.

The origin of the sulfur in your fertilizer

Ammonium sulfate, sulfur-enriched ammonium nitrate and single superphosphate contain sulfur from a single raw material: solid sulfur, a co-product of refining and gas processing. According to World Fertilizer, world sulfur demand exceeded 71 million tonnes in 2024, 60% of it for fertilizer production.

The 2026 global sulfur crisis, triggered by the closure of the Strait of Hormuz, pushed the Middle East FOB price from 173 dollars per tonne at the end of January 2025 to 531.50 dollars at the end of January 2026, according to Argus Media, before new records in spring. The price of the 75 units of sulfur for rapeseed therefore depends on the availability of solid sulfur at the fertilizer manufacturer, in France as in Belgium.

What E-Station does

E-Station supplies solid sulfur to fertilizer manufacturers, sulfuric acid producers and distributors who formulate the rapeseed sulfur fertilizers sold in growing areas. The sulfur is offered as granules, pastilles or crushed lumps, in bulk or big bags, with a certificate of analysis per lot and origins outside the Gulf, which has mattered since the tensions over Hormuz.

Our sulfur trading hub presents the available grades, and our pages on sulfur in France and sulfur delivery in France describe the sea logistics through to unloading, on FOB, CFR, CIF or DAP terms. Belgian and Swiss manufacturers will find the same information on sulfur in Belgium and sulfur in Switzerland.

Frequently asked questions

How much sulfur should be applied to rapeseed?

For sulfur on rapeseed, Terres Inovia recommends 75 kg of SO3 per hectare in sulfate form, systematically. On plots that regularly receive manure or slurry, the rate can be reduced to 50 units, but never below.

When should sulfur be applied to rapeseed?

The application is made with the first or second nitrogen application, between stages C2 and D1, at the start of stem elongation. North of the Loire, Terres Inovia advises waiting until the end of February to limit leaching.

Why does rapeseed need so much sulfur?

Rapeseed is a brassica that synthesises glucosinolates and proteins rich in sulfur amino acids. Its total requirements reach about 200 kg of SO3 per hectare, and a deficiency can cost 10 to 20 q/ha according to Terres Inovia.

Which form of sulfur should be chosen for rapeseed?

The sulfate form is directly available and suits the uptake peak during stem elongation. Ammonium sulfate, sulfur-enriched ammonium nitrate and sulfur-enriched nitrogen solution are the most common carriers, while elemental sulfur acts more slowly.

How much does sulfur deficiency cost on rapeseed?

Terres Inovia puts the yield loss at between 10 and 20 q/ha in situations of marked deficiency. A foliar or soil correction with ammonium sulfate limits the damage, without restoring the initial potential.

You manufacture or distribute the fertilizers that supply sulfur for rapeseed and are looking for certified solid sulfur supply from outside the Gulf, delivered to the port of your choice. Request a quotation stating the annual tonnage and discharge port, and you will receive a dated proposal backed by a certificate of analysis.