Skip to main content

Bitumen trading

Bitumen 50/70 (EN 12591) – wholesale purchase and export

Bitumen 50/70 is the reference penetration grade for roads in Europe. It is the grade required by French, Belgian and Romanian specifications, because it is defined by the European standard EN 12591. E-Station sources it from its network of refineries in the Kurdistan Region of Iraq (Erbil and Sulaymaniyah) and delivers it in bulk or packaged to public works companies, asphalt plants and importers. Each lot comes with its technical data sheet, safety data sheet and certificate of origin. It is a common penetration grade of the bitumen (asphalt).

Bitume routier 50/70 conforme à la norme EN 12591 – négoce et export E-Station pour enrobés et chaussées
Bitumen 50/70 (EN 12591), the standard grade for asphalt mixes in temperate climates.

Technical specifications (EN 12591)

The “50/70” refers to the penetration: a standardised needle sinks between 50 and 70 tenths of a millimetre into the product at 25 °C. All the values below are measured according to the European (EN) test methods.

Characteristic Test method Min. Max.
Penetration at 25 °C (100 g, 5 s), 0.1 mm EN 1426 50 70
Softening point, °C EN 1427 46 54
Flash point, °C EN ISO 2592 230 —
Solubility in trichloroethylene, % EN 12592 99,0 —
Penetration index Annex A −1.5 +0,7
Dynamic viscosity, Pa·s EN 12596 145 —
Fraass breaking point, °C EN 12593 — −8
Kinematic viscosity at 135 °C, mm²/s EN 12595 295 —

Resistance to hardening after RTFOT (163 °C), according to EN 12607-1:

Characteristic Min. Max.
Retained penetration, % 50 —
Increase in softening point, °C — 11
Change in mass (absolute value), % — 0,5

These are the EN 12591 normative requirements. The actual batch results appear on the technical data sheet supplied with each order.

Need cold asphalt? We deliver Époxy végétal in one-tonne big bags anywhere in mainland France, with traffic possible 10 minutes after laying. Choose your department and the delivered price is displayed.

Order cold asphalt

50/70 or 60/70? How to choose

The two grades overlap almost entirely on penetration. The real difference is not the hardness, it is the standard cited in your specifications. The 50/70 falls under the European standard EN 12591; the 60/70 under the American standard ASTM D946, used in the Middle East, Africa and Asia. If your buyer is in Europe, ask for the 50/70. If they work under an ASTM reference, it is the bitumen 60/70. We supply both.

Applications

The 50/70 is used mainly to produce hot-mix asphalt for base and wearing courses: urban roads, secondary roads, motorways, airport runways, industrial platforms. It performs well under heavy traffic in temperate European climates. It is also found in waterproofing membranes and as a base for emulsions.

Packaging and delivery

We deliver bitumen 50/70 in the following forms:

  • ✓Heated bulk, in tanker truck or iso-tank
  • ✓Metal drums from 150 to 220 kg
  • ✓Jumbo bags / meltable bags of 1 tonne, or flexitank

Minimum order quantity: 500 MT. Ex works port or refinery. Incoterms offered: EXW, FOB, CIF. We tailor the logistics solution to your destination and your project schedule.

Origin and traceability

Our bitumen comes from a network of refineries in the Iraqi Kurdistan region, in Erbil and Sulaymaniyah. Working with several sources rather than a single one allows us to sustain volumes and ensure continuity of supply, even if there is a disruption at one site. Unlike the offers of unclear origin found on many marketplaces, every shipment is documented: batch technical data sheet, safety data sheet (SDS), declaration of performance and certificate of origin.

50/70 bitumen price

The price follows the petroleum-derivatives market and varies according to volume, packaging and destination. We therefore do not apply a fixed rate: send us your request with the grade, quantity, port of destination and desired Incoterm, and you will receive a firm quote within 48 hours. See also our page Buying bitumen: logistics and Incoterms and our guide Choosing the right bitumen grade.

Frequently asked questions

Does bitumen 50/70 exist under the ASTM standard?

No. The 50/70 is a grade of the European standard EN 12591. Under the American ASTM D946 standard, the closest equivalent is the 60/70.

What is bitumen 50/70 used for?

To produce hot-mix asphalt for base and wearing courses: roads, motorways, airport runways and industrial platforms.

What documents do you provide with the goods?

Batch technical data sheet, safety data sheet (SDS), declaration of performance and certificate of origin.

What is the minimum order quantity?

The minimum order quantity is 500 MT.

Where does your bitumen come from?

From several refineries in the Iraqi Kurdistan region, in Erbil and Sulaymaniyah. This multiple sourcing secures volumes and lead times.

How do I get a price?

Send a quote request with the grade, quantity, destination and Incoterm. Firm reply within 48 hours.

Quote within 48 hours

Request a bitumen 50/70 quote

Specify your grade, quantity, port of destination and desired Incoterm. Our trading teams will respond with a firm offer within 48 hours.

Request a quotation